Traffic Shaping on Cisco 3750
I have a question, how can I shape traffic for some ports to 1024 kbps (1 Mbit)
Does somebody have an example config for this or a guid to configure?
Thx in advance,
Joeri
----------
This is my version of the Cisco 3750
Cisco IOS Software, C3750 Software (C3750-IPSERVICES-M), Version 12.2(25)SEB2, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Wed 08-Jun-05 01:19 by yenanh
ROM: Bootstrap program is C3750 boot loader
BOOTLDR: C3750 Boot Loader (C3750-HBOOT-M) Version 12.1(14r)EA1a, RELEASE SOFTWARE (fc1)
GBS-L3-SW01 uptime is 5 days, 12 hours, 55 minutes
System returned to ROM by power-on
System restarted at 03:59:30 UTC Sun Oct 9 2005
System image file is "flash:c3750-ipservices-mz.122-25.SEB2/c3750-ipservices-mz.122-25.SEB2.bin"
cisco WS-C3750-24TS (PowerPC405) processor (revision E0) with 118784K/12280K bytes of memory.
Processor board ID CAT0826N2Q7
Last reset from power-on
1 Virtual Ethernet interface
24 FastEthernet interfaces
2 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
2 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:11:92:9B:**:**
Motherboard assembly number : 73-7055-08
Power supply part number : 341-0034-01
Motherboard serial number : CAT082*****
Power supply serial number : PHI080*****
Model revision number : E0
Motherboard revision number : A0
Model number : WS-C3750-24TS-S
System serial number : CAT0826N2Q7
Hardware Board Revision Number : 0x06
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 1 26 WS-C3750-24TS 12.2(25)SEB2 C3750-IPSERVICES-M
