See Anything Wrong Guys?
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-RELEASE #0: Mon Jan 28 14:12:36 PST 2002
root@bsd1.verifast.com:/usr/src/sys/compile/BSDv1
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1263.45-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 2147221504 (2096896K bytes)
avail memory = 2088587264 (2039636K bytes)
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 3, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 4, version: 0x000f0011, at 0xfec00000
io1 (APIC): apic id: 5, version: 0x000f0011, at 0xfec01000
Preloaded elf kernel "kernel" at 0xc0307000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 13 entries at 0xc00f3bb0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib1: <ServerWorks host to PCI bridge> on motherboard
IOAPIC #1 intpin 11 -> irq 2
IOAPIC #1 intpin 10 -> irq 5
pci1: <PCI bus> on pcib1
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x2400-0x24ff mem 0xfebe0000-0xfebe0fff irq 2 at device 7.0 on pci1
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x2000-0x20ff mem 0xfebf0000-0xfebf0fff irq 5 at device 7.1 on pci1
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/255 SCBs
pcib0: <ServerWorks host to PCI bridge> on motherboard
IOAPIC #1 intpin 5 -> irq 7
IOAPIC #1 intpin 4 -> irq 9
IOAPIC #1 intpin 2 -> irq 10
IOAPIC #0 intpin 10 -> irq 11
pci0: <PCI bus> on pcib0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x1400-0x143f mem 0xfeaa0000-0xfeabffff,0xfeae0000-0xfeae0fff irq 7 at device 3.0 on pci0
fxp0: Ethernet address 00:03:47:a4:fb:23
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0x1440-0x147f mem 0xfea60000-0xfea7ffff,0xfea80000-0xfea80fff irq 9 at device 4.0 on pci0
fxp1: Ethernet address 00:03:47:a4:fb:24
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <ATI Mach64-GR graphics accelerator> at 12.0 irq 10
isab0: <PCI to ISA bridge (vendor=1166 device=0201)> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Generic PCI ATA controller> port 0x410-0x413,0x3a0-0x3af,0-0x3,0-0x7,0-0x3,0-0x7 at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
pci0: <OHCI USB controller> at 15.2 irq 11
pcib2: <ServerWorks host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib2
pcib3: <ServerWorks host to PCI bridge> on motherboard
pci3: <PCI bus> on pcib3
pcib4: <Host to PCI bridge> on motherboard
pci4: <PCI bus> on pcib4
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff,0xc9800-0xcafff,0xcb000-0xd0fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
SMP: AP CPU #1 Launched!
acd0: CDROM <SAMSUNG CD-ROM SN-124> at ata0-master using PIO4
Waiting 5 seconds for SCSI devices to settle
pass1 at ahc1 bus 0 target 6 lun 0
pass1: <ESG-SHV SCA HSBP M18 0.06> Fixed Processor SCSI-2 device
pass1: 3.300MB/s transfers
da0 at ahc1 bus 0 target 0 lun 0
da0: <SEAGATE ST336706LC 0108> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 35003MB (71687370 512 byte sectors: 255H 63S/T 4462C)
Mounting root from ufs:/dev/da0s1a
arplookup 66.28.252.9 failed: host is not on local network
arplookup 66.28.252.9 failed: host is not on local network
arplookup 66.28.252.9 failed: host is not on local network
